#Datatool s4 red removal full#

We advise you to carry the quick reference card with you for roadside guidance. For a more basic explanation refer to the credit card sized instructions (S4 Quick reference) supplied. Operating the alarm system This section explains fully how the alarm system works. To replace the battery remove the small screw from the ‘key end’ of the remote and split the two halves of the case. As the battery within the remote control comes to the end of its life, you will notice a reduction in its range and the battery should be replaced. Normal range for the remote control is around 10 metres. This battery will normally last at least 12 months. The GREY button controls the main arm/disarm functions of the system.Ĭhanging your remote control battery Each remote control contains a single long-life lithium battery (CR1616).S4 Red/Green standard 02012091 Datatool S4REM What the buttons do: There are two buttons on your transmitter. The picture below show the type of transmitter supplied with your alarm. It is possible to add up to 4 extra remote controls (6 in total). Your remote control All S4 systems come supplied with 2 remote controls as standard. For these reasons, we advise you to discuss the options available with your installing dealer. Some of these features can only be adjusted by your dealer and are dependent on local regulations. The system provides many unique features designed to increase the protection of your machine or to customise its operation to meet your individual requirements. See my feed back profile about this connector.Welcome Thank you for choosing the new Datatool® S4 Alarm system for your motorcycle. This plug will not bypass the factory fitted immobiliser system fitted to Triumphs made from 2016 onwards, it will only bypass the alarm system if fitted.

#Datatool s4 red removal full#

Guaranteed to function or your money back (please return plug for full refund) This plug is only for Datatool S3 & S4 alarms fitted to Triumph motorcycles only, if your alarm is fitted to another make of motorcycle please see my other listings for removing Datatool alarms.If the bikes starts & runs but cuts out when a gear is selected means the fault is with the bike, the bypass plug will not fix this problem. Quality aftermarket item encased in a waterproof cover. Can also be used as a diagnostic device to determine whether a fault is with the alarm or with the bike.

For all Triumph model years between 2004-2021, not for the 8 way plug fitted late 2021, see images for more information. If the 14 way plug has been removed or is not fitted to the bike this plug will be of no use, see my other listings which may be of help. Simply follow the wire from the alarm to locate the 14 way factory fitted plug.

Simple to remove any faulty alarm fitted to all Triumph motorcycles which use the factory fitted alarm 14 way connector which can usually be found somewhere under the seat. Item: 255852618615 TRIUMPH DATATOOL S3 & S4 ALARM REMOVAL PLUG, easy removal of faulty alarms.